3 Volt Inverter for EL-Panels up to 15cm2 area

3 Volt Inverter for EL-Panels up to 15cm2 area

Not rated yet


8,83 EUR

19 % VAT incl. excl. Shipping costs

Product no.: RP-CFL20-0120s-s78
Shipping time: from 6.Dec.18 due to reconstruct

Properties

  • small electronic EL-inverter without housing for a DC power supply between 1.2 and 4.5 Volt
  • black and red cable with clip for DC power supply
  • 2 yellow wires for the EL-panel
  • small power coil (can be located elsewhere with a cable, max. 15 cm)
  • a frequency regulating resistor can be mounted optionally
  • small dimensions (LxWxH): 12mm x 15mm x 7mm (incl. height of coil, which can be placed elsewhere)
  • low EMI
  • silent, no noise

Main applications

  • supply of our EL-panels between 5 cm2 and 15 cm2
  • (the output can evtl. be increased by change of coil and capacitor)
  • a flat and small driver for a subsequently integrated backlight
  • small and flat EL-developments
  • replacement for defective or inefficient EL-driver
  • small, flat and compact light sources of all kinds


Technical data

  • A detailled datasheet is attached below this description.

 


Mechanichal
Tolerance
Length L 12 mm +/- 0.1 mm
Width W 15 mm +/- 0.1 mm
Heigth H 7 mm +/- 0.1 mm
Weight incl. cables + coil
3.4 g +/- 0.2 g
Length supply cable 100 mm
+/- 5 mm
Length output cable
100 mm
+/- 5 mm
Working temperature -40 bis + 85°C -
Storage temperature - 40 bis + 85°C -
Housing no -
Electrical
Supply voltage
1.2 - max. 4.5 Volt DC
-
Supply current
28 mA at 3 V
-
Working voltage
~92 VRMS +/- 10 VRMS
Supported EL-area 5 - 15 cm2 -
Sinuslike AC 400 Hz +/- 40 Hz
TTL ON/OFF-control no -
Inductivity Lcoil
2.2 mH/18 Ohm
+/- 10%
Optional Resistor Rfrequency
50 - 150 KOhm
-
Overview technical details



Additional notes

none

 

 

 

 

Customer reviews for "3 Volt Inverter for EL-Panels up to 15cm2 area"

No reviews yet. Be the first to write a review...

This Product was added to our catalogue on Thursday 05 July, 2018.

Product 1 of 8 in this category