Products description
Properties
- inverter without housing for 12 Volt DC power supply
- not dimmable
- DC supply jacket for B2B-XH-A connector
- high voltage/lamp output for B3B-XH-A connector
- 3 mounting holes
Main applications
- supply of CCFLs with a working voltage of around 510 Volt at about 5mA
- inexpensive replacement for electronic inverters in all kinds of displays
- driver circuit for high voltage cascades
Technical data
| Mechanichal | Tolerance | |
| Length L | 50 mm | +/- 0.5 mm |
| Width W | 18 mm | +/- 0.5 mm |
| Heigth H | 12 mm | +/- 1 mm |
| Weight | 10 g | +/- 1 g |
| Length supply cable | - | - |
| Length output cable | - | - |
| Working temperature | 0 bis + 60°C | - |
| Storage temperature | - 20 bis + 80°C | - |
| Housing | no | - |
| Electrical | ||
| Supply voltage | 12 Volt DC | +/- 1 Volt DC |
| Supply current | 280 mA | +/- 20 mA |
| Working voltage | 510 VRMS | +/- 50 VRMS |
| Working current | 5 mARMS | +/- 5 mARMS |
| Power output | 2550 mVA | +/- 10 % |
| Sinuslike AC | 50 KHz | +/- 5 KHz |
| Fuse in DC supply circuit | no | - |
| Fuse in AC output circuit | no | - |
Additional notes
The installation and exchange of inverters requires certain technical skills. Our safety and handling instructions for inverters and CCFLs keep you up-to-date. We kindly ask you to read this instructions carefully, which can be found in the area: Information. Usually our standard inverters are offered including cables(watch description of the article). If needed we offer silicone replacement cables in other dimensions and caps and other hard to find parts in the area: CCFL -> Accessories.
Customers who bought this product also bought the following products:
Cold Cathod Fluorescent Lamp 160mm x 2.6mm (L x Ø), type standard, white, 7800°K
Encapsuled and shielded 12 Volt inverter for CCFLs with 200-240mm length x 2mm diameter, single ouput, not dimmable standard inverter. Dimensions(LxWxH): 85mm x 24mm x 18mm
This Product was added to our catalogue on 31/05/2017.
