Products description
Properties
- inverter for electroluminiscent panels for 3 Volt DC power supply
- black housing filled with resin
- not dimmable
- 4 solderable pins for 3 Volt DC supply and EL-panel output, watch picture
- pin pitch 20mm x 14mm
- weight: 19g
- RoHS conformity
Main applications
- supply of EL-panels between 10cm2 and 40cm2
- inexpensive replacement for all kind of EL-inverters
Technical data
| Mechanichal | Tolerance | |
| Length L | 27 mm | +/- 0.5 mm |
| Width W | 21 mm | +/- 0.5 mm |
| Heigth H | 20 mm | +/- 0.5 mm |
| Total weight | 19 g | +/- 1 g |
| Pin pitch | 20 x 14 mm | - |
| Working temperature | 0 bis + 60°C | - |
| Storage temperature | - 20 bis + 80°C | - |
| Housing | yes | - |
| Electrical | ||
| Supply voltage | 3 Volt DC | +/- 0.5 Volt DC |
| Supply current | 40 mA | +/- 10 mA |
| Working voltage | 80 VRMS | +/- 14 VRMS |
| Sinuslike AC | 850 Hz | +/- 127 Hz |
| Fuse in DC supply circuit | no | - |
| Fuse in AC output circuit | no | - |
Additional notes
Replacement for: n.a.
Customers who bought this product also bought the following products:
Housed EL-inverter for 5 Volt DC power supply. For EL-panels up to 105cm2. Dimensions (LxWxH): 17.5mm x 17mm x 19.3mm (without solder pins)
EL-panel, azure blue, laminated, sliceable, outer dimensions(LxWxH): 40mm x 132mm x 0.33mm for Akai VX600, MPC60II
EL-inverter without housing for 2.2 up to max. 5 Volt DC power supply. For our EL-panels up to 60 cm2. Dimensions without cables (LxWxH): 15mm x 14mm x 9.5mm
Housed EL-inverter for 12 Volt DC power supply. For EL-panels up to 200cm2. Dimensions (LxWxH): 22mm x 22mm x 22mm (without solder pins)
Housed EL-inverter for 12 Volt DC power supply. For EL-panels up to 40cm2. Dimensions (LxWxH): 26mm x 21mm x 20mm (without solder pins)
This Product was added to our catalogue on 26/01/2008.
