Products description
Properties
- inverter for electroluminiscent panels for 5 Volt DC power supply
- black housing filled with resin
- not dimmable
- 3 solderable pins for 5 Volt DC supply and EL-panel output, watch picture
- dimensions(without pins, LxWxH): 27.5mm x 17mm x 19.3mm
- weight: 11g
Main applications
- supply of EL-panels between 70cm2 and 105cm2
- inexpensive replacement for all kind of EL-inverters
Technical data
| Mechanichal | Tolerance | |
| Length L | 27.5 mm | +/- 0.5 mm |
| Width W | 17 mm | +/- 0.5 mm |
| Heigth H | 19.3 mm | +/- 0.5 mm |
| Total weight | 11 g | +/- 1 g |
| Length solder pins | 10 mm | - |
| Working temperature | 0 bis + 60°C | - |
| Storage temperature | - 20 bis + 80°C | - |
| Housing | yes | - |
| Electrical | ||
| Supply voltage | 5 Volt DC | +/- 1 Volt DC |
| Supply current | 50 mA | +/- 10 mA |
| Working voltage | 60 VRMS | + 30 VRMS |
| Sinuslike AC | 600 Hz | +/- 50 Hz |
| Fuse in DC supply circuit | no | - |
| Fuse in AC output circuit | no | - |
Additional notes
none
Customers who bought this product also bought the following products:
Development pcb for SIPEX SP4405 nsoic 8-pin EL-driver chip. Dimensions: 20mm x 8mm x 1mm
Sipex SP4405 driver chip for all kinds of EL-panels in nsoic 8-pin package. Operating voltage 2.2Volt up to 4.5Volt DC.
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 18mm x 74mm x 0.42mm for LCDs in ART Multiverb III, ELKA EK33, EK44, EM33, EM44, ER33, ER44, E-MU EMAX I and II, Emulator II, SP12, SP1200, Korg DRV-2000, Kurzweil K1200, Roland Alpha Juno 1 and 2, Roland MKS-80, Roland PG1000, Sequential Circuits Prophet VS, Yamaha REV-7 and suitable for LCD Optrex DMC16207-AE, DMC16249, SHARP LCD LM16155
EL-panel, azure blue, sliceable, laminated, outer dimensions(LxWxH): 21mm x 166mm x 0.33mm for Akai Sampler S950, Drawmer M500, Dynacord ADD-one, HITEC AC-1 (cut), Korg 03 R/W, DS8, M1, M1 Rex, Re1, M3R, Lexicon MRC (cut), Positec PSS 150, PPG 2.3 (cut), Roland D-50, D-550 and Sharp LM640HCN24V
Housed EL-inverter for 12 Volt DC power supply. For EL-panels up to 200cm2. Dimensions (LxWxH): 22mm x 22mm x 22mm (without solder pins)
This Product was added to our catalogue on 09/09/2007.
Mountings and Metalcaps »
More information on your personal page »
