Products description
Properties
- White shining LED backlight, powered by 4 LEDs
- Dimensions (L x W x H): 53 x 53 x 1.7mm, cables about 150mm long with tinned wire ends
- Raw weight: ~5.5g
- Nominal working voltage: 5 Volt DC
- Current consumption at 5 Volt DC: 60mA
- Luminance at 5 Volt DC without protection layer or polarizing film: 1080 cd/m2
- Colour Temperature at 5 Volt DC: 12.000°K
 |  |
Main applications
- Smooth white backlight for the Game Boy Classic (DMG) and Game Boy Pocket
- Backlighting of other consoles and displays
- Other backlight or signal-light applications
Notes
- For the Game Boy Pocket your additionally need the trim-poti set 01 or 02 to reduce current from the accessories folder.
- A very good BUT german tutorial for the whole installion incl. many pictures can be found here:
- A profound installation service for the Game Boy and other consoles offers Andreas König alias Don King, Germany: DonKing Konsolenservice
File
Customers who bought this product also bought the following products:
Set of 1 LED-backlight + 1 polarized film + 1 biversion-pcb (for enhanced contrast) for the Game Boy (DMG) and Game Boy Pocket
1-side adhesive polarized film, 53mm x 53mm, for repair of the LCD of the Game Boy DMG and Pocket. Polarization colour: darkblue-violet. Removable protection layers on front and rear side.
Polarized film, 53mm x 53mm, polarisation color: blue-violet, for the LCD of the Game Boy. Removable protection layers on front and rear side, arrow print at the front side (onto the protection layer, only) as a help for orientation.
Set of 1 warm-white LED-backlight + 1 polarized film 75mm x 75mm for the Game Boys (DMG) polarizer mod.
Polarized film, 75mm x 75mm x 0.28mm, polarisation color: blue-violet, for the LCD of the Game Boy DMG (not Pocket!). Removable protection layers on front and rear side. This big polarisation film is specifically offered that you can adjust the polarisation angle to your need.
This Product was added to our catalogue on 15/11/2014.
