Products description
Properties
- electrodes prepared as: tinned wire ends
Main applications
- red design illumination
- case modding
Technical data
| Mechanical | Tolerance | |
| Diameter | 4.1 mm | +/- 0,1 mm |
| Length L | 300 mm | +/- 1 mm |
| Luminous length LL | > 280 mm | +/- 1 mm |
| Length of electrodes | > 10 mm | + 15 mm |
| Warm-up time | 3 min | - |
| Working temperature | 0 bis +50°C | - |
| Storing temperature | -50 bis +110°C | - |
| Electrical | ||
| Working voltage | 369 VRMS | +/- 50 VRMS |
| Working current | 5 mARMS | + 1 mARMS |
| Power consumption | 1845 mVA | +/- 10 % |
| Sinusoidal AC | 20 - 100 KHz | - |
| Optical | ||
| Colour temperature | red | - |
| Visible colour | red | - |
| Luminance | 16000 cd/m2 | +/- 5% |
| Lifetime | 20000 h | - |
Additional notes
CCFLs are made of glass, which is easily broken. The exchange of CCFL tubes and inverters requires certain technical skills. Our safety and handling instructions for inverters and CCFLs keep you up-to-date. We kindly ask you to read this instructions carefully, which can be found in the area: Information. Silicone cables and and silicone caps of the originally built-in CCFL can be re-used if in a good condition. If not re-usable we offer silicone replacement cables and caps and other hard to find parts in the area: CCFL -> Accessories.
Customers who bought this product also bought the following products:
Encapsuled and shielded 12 Volt inverter for CCFLs with 200-240mm length x 2mm diameter, single ouput, not dimmable standard inverter. Dimensions(LxWxH): 85mm x 24mm x 18mm
12 Volt inverter for CCFLs with 400-450mm length x 4.1mm diameter, single ouput, not dimmable standard inverter without housing. Dimensions(LxWxH): 78mm x 22mm x 16mm
This Product was added to our catalogue on 24/03/2007.
