Properties
- high quality EL-panel with light off colour: pink and light on colour: white
- like the original EL-panel inside the LCD displays DMF5005, AND711A, EG2401S-KR, TLX 711A
- top and bottom lamination by factory for proper protection + small side sealing
- 2 solderable contacts
- overall dimensions(LxWxH): 43mm x 155mm x 0.33mm
- luminous dimensions(LxW): 40mm x 147mm
- lifetime >3000 hrs (= 50% of initial brightness, useful lifetime >10.000 hrs)
- luminance ~ 10 cd/m2 (depends on voltage and frequency of inverter)
- EL-panel can be cut by scissors if you need a smaller luminating area
- watch the attached backlight exchange manual from below how to replace the EL-panel yourself
- shipping in a stiff and stable box to prevent a buckling of the EL-panel for a safe transport worldwide
Main applications
- replacement backlight EL-lamp for LCD display Optrex DMF5005
- replacement backlight EL-lamp for LCD display AND AND711A
- replacement backlight EL-lamp for LCD display Toshiba TLX 711A
- replacement backlight EL-lamp for LCD display Epson EG2401S-KR
- backlight EL-lamp for display of Kawai K5000R
- backlight EL-lamp for display of Kawai K5000S
- backlight EL-lamp for display of Kawai Z1000
- backlight EL-lamp for display of Korg i3
- backlight EL-lamp for display of Korg Wavestation A/D
- backlight EL-lamp for display of Korg Wavestation EX
- backlight EL-lamp for display of Korg Wavestation WS1
- backlight EL-lamp for display of Korg Wavestation WSA/D
- backlight EL-lamp for display of Roland A-50
- backlight EL-lamp for display of Roland A-80
- backlight EL-lamp for display of Roland D-70
- backlight EL-lamp for display of Roland E-96
- backlight EL-lamp for display of Roland GC-8
- backlight EL-lamp for display of Roland MV-30 (cut)
- backlight EL-lamp for display of Yamaha DEQ 5
- backlight EL-lamp for display of Yamaha SY-77
- backlight EL-lamp for display of Yamaha SY-99
- backlight EL-lamp for display of Yamaha TG-77
- backlight EL-lamp for display of Yamaha W7
- other replacement applications and machines
- ultra small and flat lighting applications
- soft white night light
- design and art objects
- light spots
- emergency lights
Remark: The org. backlight of the Roland E-96 and some other devices have their pins at a slight different position. Therefore you need to add small cables to our EL-panel to fit to the solder points. For the Roland MV30 our EL-panel should be could in its length for about 8 - 10mm to fit its org. length of 145mm.
(Notes: Application listing is uncomplete and without warranty.)
Customer reviews for "EL-Panel, pink-white, 43mm x 155mm, laminated"
No reviews yet. Be the first to write a review...
