Products description
Properties
- high quality EL-panel with light off colour: grey and light on colour: mountain blue = azure blue
- top and bottom lamination by factory for proper protection + small side sealing
- 2 solderable contacts
- overall dimensions(LxWxH): 43mm x 155mm x 0.33mm
- luminous dimensions(LxW): 40mm x 147mm
- lifetime >3000 hrs = 50% of initial brightness, useful lifetime >10.000 hrs
- luminance ~ 10 cd/m2 (depends on voltage and frequency of inverter)
- EL-panel can be cut by scissors if you need a smaller luminating area
- watch the attached backlight exchange manual from below how to replace the EL-panel yourself
- shipping in a stiff and stable box to prevent a buckling of the EL-panel for a safe transport worldwide
Main applications
- backlight EL-lamp for LCD display Optrex DMF5005
- backlight EL-lamp for LCD display AND AND711A
- backlight EL-lamp for LCD display Toshiba TLX 711A
- backlight EL-lamp for display of Korg i3
- backlight EL-lamp for display of Korg Wavestation A/D
- backlight EL-lamp for display of Korg Wavestation EX
- backlight EL-lamp for display of Korg Wavestation WS1
- backlight EL-lamp for display of Korg Wavestation WSA/D
- backlight EL-lamp for display of Roland A-50
- backlight EL-lamp for display of Roland A-80
- backlight EL-lamp for display of Roland D-70
- backlight EL-lamp for display of Roland GC-8
- backlight EL-lamp for display of Yamaha DEQ 5
- backlight EL-lamp for display of Yamaha QS300
- backlight EL-lamp for display of Yamaha SY-77
- backlight EL-lamp for display of Yamaha SY-99
- backlight EL-lamp for display of Yamaha W5
- backlight EL-lamp for display of Yamaha W7
- other replacement applications and machines
- ultra small and flat lighting applications
- blue night light
- design and art objects
- light spots
- emergency lights
(Notes: Application listing is uncomplete and without warranty.)
File
Customer reviews:
Ordered this EL panel to replace the EL panel of a Korg WS/AD.
Received in a very good packaging and a short time.
New EL panel has been slided over the old one, pasted on the board, without any problem.
Everything works fine!! Great
Do not forget to read carefully the notes and hints you will find in the packaging.
Thank's Backlight4you
Ordered this EL panel to replace the EL panel of a Korg 01 R/W. Replacement was a quick fix and result is great. Within the delivery, there was an usefull guide with tips (read this guide!). One of the tips is to slide the replacement EL panel over the old one rather then to take apart the LCD screen to remove the old EL panel. Great tip and works like a charm. Just desolder the old EL panel connection pins attached to the PCB and remove (cut) the pins from the old EL panel. Then slide the new EL panel over the old EL panel (I didn't have to use any force at all) and solder the pins from the new EL panel onto the PCB (another tip in the guide is to use a copper coin as a heat sink to prevent overheating the EL panel pins which can cause them to detach from the EL panel). Thank you Backlight4you for the easy ordering process, quick delivery (DE -> NL) and comprehensive information within the delivery and this site!
Customers who bought this product also bought the following products:
EL-inverter without housing for 2.2 up to max. 5 Volt DC power supply. For our EL-panels up to 60 cm2. Dimensions without cables (LxWxH): 15mm x 14mm x 9.5mm
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 18mm x 74mm x 0.42mm for LCDs in ART Multiverb III, ELKA EK33, EK44, EM33, EM44, ER33, ER44, E-MU EMAX I and II, Emulator II, SP12, SP1200, Korg DRV-2000, Kurzweil K1200, Roland Alpha Juno 1 and 2, Roland MKS-80, Roland PG1000, Sequential Circuits Prophet VS, Yamaha REV-7 and suitable for LCD Optrex DMC16207-AE, DMC16249, SHARP LCD LM16155
EL-panel, pink-white, laminated, sliceable, outer dimensions (LxWxH): 39mm x 93mm x 0.42mm, backlight for Korg N264, Korg N364, Korg X3, Korg X3-r, Roland E660 EQ
EL-panel, azure blue, laminated, sliceable, outer dimensions(LxWxH): 47mm x 157mm x 0.33mm for LCD Optrex DMF5005, LCD Sharp LM24014, Akai MPC60 version 1, ASQ-10, EMU Emulator IV, Korg 01 R, 01W, 01 WFD, T1, T2, T3, Kurzweil K2000(r), Roland DM80R, DM800, S750, S770, W-30
Housed EL-inverter for 5 Volt DC power supply. For EL-panels up to 105cm2. Dimensions (LxWxH): 17.5mm x 17mm x 19.3mm (without solder pins)
This Product was added to our catalogue on 21/05/2010.
